|
|
|
X-66 CASING
BEAD (PLASTER STOP)
Casing bead is used as a plaster stop, screed ground,
as exposed trim around doors and windows, and as a base screed.
Available in galvanized steel and zinc alloy, 10 ft. lengths,
30 pieces, 300 feet per carton. The expanded flange width is 3
inches.
|
Grounds
|
Galvanized Weight per 1000 Lin. Feet
|
Zinc Weight per 1000 Lin. Ft
|
|
1/4"
|
135 Lbs.
|
130 Lbs.
|
|
3/8"
|
147 Lbs.
|
140 Lbs.
|
|
1/2"
|
155 Lbs.
|
148 Lbs.
|
|
5/8"
|
163 Lbs.
|
156 Lbs.
|
|
3/4"
|
170 Lbs.
|
163 Lbs.
|
|
7/8"
|
178 Lbs.
|
171 Lbs.
|
|
1"
|
186 Lbs.
|
178 Lbs.
|
|
1 1/4"
|
195 Lbs.
|
186 Lbs.
|
|
|
Click to Enlarge
|
|
N-66 CASING
BEAD
This product has the same basic profile as the X-66,
but without the expanded flange. Nail and keying holes are provided
in the flange, which is approximately one inch wide. Available
in galvanized steel and zinc alloy, 10 ft. lengths, 30 pcs., 300
feet per carton. This product is manufactured in Fontana, CA,
but available by special order throughout the AMICO system.
|
Grounds
|
Galvanized Weight per 1000 Lin. Feet
|
Zinc Weight per 1000 Lin. Ft
|
|
3/8"
|
123 Lbs.
|
117 Lbs.
|
|
1/2"
|
130 Lbs.
|
125 Lbs.
|
|
3/4"
|
147 Lbs.
|
138 Lbs.
|
|
7/8"
|
155 Lbs.
|
148 Lbs.
|
|
1"
|
185 Lbs.
|
179 Lbs.
|
|
1 1/4"
|
216 Lbs.
|
194 Lbs.
|
|
|
Click to Enlarge
|
|
“J”
METAL 3/8” to 1 3/8” GROUNDS
This square nosed casing was originally provided in
1 3/8" to accommodate 1" of rigid insulation and 3/8"
of one-coat stucco with weep holes in the ground flange located
under the rigid insulation. This casing or plaster stop now includes
one-coat casing beads for use with approved one-coat systems that
require this type of bead at the base of the wall. Nailing flange
width is 3 ½ inches. This should not be considered a
true foundation weep screed for three-coat stucco applications.
"J" metal is manufactured in Fontana, CA.
|
Grounds
|
Gage
|
Nailing Flange Width
|
Bundles per Pallet
|
Weight
|
|
3/8"
|
26
|
3 1/2"
|
100
|
260
|
|
1/2"
|
26
|
3 1/2"
|
100
|
270
|
|
1 3/8"
|
26
|
1 7/8"
|
100
|
206
|
|
*1 3/8"
|
28
|
3 1/2"
|
50
|
255
|
|
1 3/8"
|
26
|
3 1/2"
|
50
|
327
|
|
|
Click to Enlarge
|
* The Uniform Building Code requires that all weep screeds have a 3½”
nailing flange with holes, manufactured from minimum 26-gage steel.
Additional sizes and gages are offered for non-code work. AMICO recommends
the use of zinc or vinyl beads for all exterior applications.
|
